AoooGFUEL LEVEL SENSORS
Language: English

WIRELESS SENSOR APP GUIDE

Download. Connect. Configure.

Use Fuel Master to view sensor readings, configure parameters and calibrate your AG-BFLS wireless Bluetooth fuel level sensor.

DOWNLOAD FROM YOUR APP STORE

Choose your platform.

Fuel Master connects to AoooG AG-BFLS wireless Bluetooth fuel level sensors for readings, configuration and calibration. Select the store for your device.

APPLE SILICON

Mac

Requires macOS 11.0 or later and an Apple M1 chip or later. The iPad app is available on compatible Macs; the store lists it as not verified for macOS.

View in the Mac App Store ↗

Store availability and requirements are shown on the linked listing. Store releases and the direct Android APK download may have different version numbers.

FIRST-TIME SETUP

Connect to your wireless sensor.

Install from the appropriate store above. On Mac, use the same AoooG Fuel Master listing and check the device requirements before installation.

If Google Play is unavailable, download Fuel Master V0.1.4 (ZIP, 27.0 MiB), extract the archive and install the APK on Android.

The website APK version is independent of the store versions.

  1. 01

    Install and open Fuel Master

    On Android, select Install in Google Play. On iPhone, iPad or a compatible Mac, select Get in the App Store.

  2. 02

    Enable Bluetooth

    Allow Bluetooth access when prompted. Grant any additional permissions requested for Bluetooth scanning on your device.

  3. 03

    Activate and select the sensor

    Activate the AG-BFLS using the magnet as described in the manual for your sensor revision. Open the scan screen and select the sensor by its serial number.

  4. 04

    Configure and calibrate

    Follow the in-app guidance and sensor manual to set the empty/full references, installation parameters and calibration table. Save your settings.

APP FUNCTIONS

Work with your sensor.

View readings

Inspect fuel level readings and sensor status while connected.

Set calibration

Set empty and full reference points and prepare the tank calibration data.

Configure parameters

Review supported sensor settings and save the configuration for your installation.

Explore AG-BFLS ↗Bluetooth integration reference ↗